132985450.qxd 18/07/2005 17:47 Pagina 7
7 QUICK WASH button
This option can be used for lightly soiled cotton, synthetic or delicate items hat have been used or worn for a short time.
This option is not available with the WOOL/
(handwash) 
programme, the Energy saving programmes (60°E and 40°E) and Miniprogram 
.
It cannot be used also in combination with DAILY option.
8 SUPER RINSE button
This option can be selected with all programmes, except the WOOL/ HANDWASH 
and Miniprogram 
. The machine will add 2 rinses for cotton and 1 rinse for synthetics and delicates.
This option is recommended for people who are allergic to detergents and in areas where the water is very soft.
9 EASY IRON button
Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform 6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This function can be used only for cotton and synthetic fabrics.
If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with a temperature of 60°C or 50°C, the machine will perform a washing cycle at max 40°C.
10 DELAY START button 
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours by means of this button.
Selecting the delayed start
●Select the programme and the required options.
●Select the delay start.
●Depress START PAUSE button: the machine starts its hourly countdown.
The programme will start after the selected delay has expired. The DELAY START cannot be used with 
(DRAIN), 
(SPIN) or 
(DELICATE SPIN)
programmes.
Cancelling the delayed start
●Depress START PAUSE button.
●Depress DELAY START button until «0’» is displayed.
●Depress START PAUSE button again, if you wish to restart the machine immediately.
11 START/PAUSE button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.
If you have selected the delayed start, the machine begins its countdown. The duration of the programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress the START PAUSE button: the corresponding pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the START PAUSE button again.
12 DISPLAY
The display shows the following information:
Reset/Cancelling - Duration of the programme - Delayed start - Incorrect option selection - Alarm code - End of programme.
Reset/cancellation of the programme
If the programme selector dial is turned to X position, three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not turned to X position , when you press the ON/OFF button to switch the machine on, the display will show a blinking zero.)
7
