132985450.qxd 18/07/2005 17:47 Pagina 11
Operating Sequence
Before the first wash, we recommend that you run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment 
of the dispenser drawer and start the machine.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
3. Switch the machine on
To switch the machine on, press the ON/OFF button: the
0
ON/OFF
P0004
2.Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour it into the main wash compartment 
.
If you have selected the PREWASH option, pour detergent into the compartment marked 
.
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
4. Select the required programme
Turn the programme selector dial to the desired position: the display will show the duration of the selected programme.
SPECIAL | X | 95º | COTTON |
| 60ºE | ||
|
|
| 60º |
40ºE
40º | 2.05 |
| |
30º |
|
WOOL
30º
60º
40º |
|
| 60ºE |
30º | 40º | 30º | 40º |
DELICATES |
|
| SYNTHETICS |
The lights corresponding to the different phases making up the selected programme light on.
P0006 |
P0005 |
5.Select the SPIN speed or RINSE HOLD option 
Depress the spin speed button to choose the required speed or RINSE HOLD option 
: the corresponding light comes on.
1200
900
700
500
SPIN
SPEED
11
