Filling with rinse aid
(Rinse aid dispenser type B)
1.Open the container by turning the lid (A) anticlockwise.
2.Fill with rinse aid exactly up to the level indicator marked "max".
Top up with rinse aid when:
1.The indicator (B) becomes clear,
BR01 |
BR13 |
2. Only for dishwasher models with rinse aid indicator |
light: |
When the rinse aid indicator light on the control panel |
Ensure the lid is closed after every refill.
illuminates (when the machine is switched on). |
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on the dishes after washing.
The dose is factory set in position 5.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Reduce it if there are sticky whitish streaks on the dishes.
BR02 |
5
