Zanussi DE 6554 manual To deactivate the rinse aid indicator light proceed as follows

Models: DE 6554

1 24
Download 24 pages 2.32 Kb
Page 7
Image 7
(Rinse aid dispenser type B)

Filling with rinse aid

(Rinse aid dispenser type B)

1.Open the container by turning the lid (A) anticlockwise.

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Top up the rinse aid when the rinse aid indicator light on the control panel illuminates.

It is possible to deactivate the rinse aid indicator light (see following instructions).

BR01

BR13

To deactivate the rinse aid indicator light proceed as follows:

(The dishwasher must be switched off)

1.

Press function push buttons 1 and 2 simultaneously.

2.

While keeping the function push buttons 1 and 2 pressed

 

switch on the dishwasher by pressing the On/Off push

 

button.

 

The On/Off indicator light comes on.

 

At the same time, the indicator lights of function push

Ensure that the lid is closed after every refill.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on the dishes after washing.

 

buttons 1 and 2 start flashing.

3.

Press function push button 2, the corresponding indicator

 

light keeps flashing while the indicator light of function push

 

button 1 turns off. At the same time the rinse aid indicator

 

light starts to flash.

4.

Press function push button 2 again, the rinse aid indicator

 

light turns off, this means that the rinse aid indicator light

 

has been deactivated.

The dose is factory set in position 5.

Reduce it if there are sticky whitish streaks on the dishes.

BR02

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off push button.

To reactivate the rinse aid indicator light follow the same process until the rinse aid indicator light starts to flash.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

7

Page 7
Image 7
Zanussi DE 6554 manual To deactivate the rinse aid indicator light proceed as follows, Rinse aid dispenser type B