eSelect the pattern you wish to retrieve.
Switch screens using | (Previous page key) | |
and | (Next page key). |
|
b
a
c
aTotal amount of memory used b Total amount of memory space
c Number of the currently displayed page from the total number of pages
The selected pattern is shown in reverse highlighting.
fPress 
.
The saved pattern is retrieved.
The embroidery screen appears, and you can embroider the retrieved pattern.
gAdjust the pattern as desired, and then begin embroidering.
Note
If there are 13 or more patterns saved in “Removable Disk”, the patterns cannot be displayed. When the message “Reduce the number of patterns. Only up to 12 patterns can be handled.” appears, delete patterns from “Removable Disk” so that it contains
no more than 12 patterns. Then, close the error message, repeat the procedure starting
from step d and then press to retrieve the pattern.
If patterns copied to “Removable Disk” are not saved in the machine's memory, their data is lost when the machine is turned off. In order to retrieving patterns directly from the machine the next time that they are needed, save the data in the machine's memory before turning off the machine. For details, refer to “Saving patterns” of the Operation Manual.
Error messages
Memo
This manual describes the error messages concerning the USB connection. For details on other error messages, refer to the Operation Manual.
Error Message | Probable Cause |
|
|
When 13 or more patterns are in “Removable Disk”, a pattern was being retrieved.
The start/stop button was pressed after selecting a pattern which is saved in the machine's memory or entered from the USB port without
pressing 
(Retrieve key).
4
