D-6
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
AppendixD CLI Error Messages
CLI Validation Error Messages
CLI Validation Error Messages
Tabl e D-2 describes the validation error messages.
TableD-2 Validation Error Messages
Error Message Reason/Location
Interface ‘name’ has not been subdivided.
The physical interface or inline interface name
subinterface type is none (service interface
submode).
Interface ‘name’ subinterface ‘num’ does
not exist.
The physical interface name has been subdivided
into inline VLAN pairs, but the specified
subinterface number does not exist (service
interface submode).
Interface ‘name’ is the command-control
interface.
The physical interface name is the command and
control interface (service interface submode).
Interface ‘name’ has been subdivided.
The physical interface name subinterface type is
inline VLAN pair or VLAN group. Or the inline
interface name subinterface type is VLAN grou p
(service interface submode).
Interface ‘name’ is assigned to
inline-interfaces ‘inlinename.’
The physical interface name is assigned to an
inline interface entry’s interface1 or interface2
(service interface submode).
Vlan ‘vlannum’ is assigned to subinterface
‘subnum.’
The VLAN vlannum is already assigned to a
different subinterface subnum entry’s vlan1 or
vlan2 (service interface submode).
Vlan range ‘vlanrange’ overlaps with vlans
assigned to subinterface ‘subnum.’
The VLAN range vlanrange contains values that
are already used in a different subinterface
subnum entry’s vlans range (service interface
submode).
Unassigned vlans already assigned to
subinterface ‘subnum.’
Unassigned VLANs have already been selected in
a different subinterface subnum entry.
Inline-interface ‘inlinename’ does not
exist.
The inline interface inlinename does not exist
(service interface submode).
The default-vlans for the selected
interfaces do not match. interface1, ‘name’
default-vlan is ‘vlannum,’ interface2,
‘name’ default-vlan is ‘vlannum.’
The user is trying to change the subinterface type
of an inline interface to VLAN group, but the
default VLANs for the two interfaces assigned to
the inline interface do not match (service interface
submode).
interface1 and interface2 must be set
before the logical interface can be divided
into subinterfaces
.
The user is trying to change the subinterface type
of an inline interface to VLAN group, but has not
set both interface1 and interface2 (service
interface submode).
Interface ‘name’ has not been subdivided
into inline-vlan-pairs.
The physical interface name subinterface type is
not inline VLAN pair (service interface
submode).