C H A P T E R 7
Installing the IPS 4510 and IPS 4520
Contents
This chapter describes the Cisco IPS 4510 and IPS 4520, and includes the following sections:
•Installation Notes and Caveats, page
•Product Overview, page
•Chassis Features, page
•Specifications, page
•Accessories, page
•Memory Configurations, page
•Power Supply Module Requirements, page
•Supported SFP/SFP+ Modules, page
•Installing the IPS 4510 and IPS 4520, page
•Removing and Installing the Core IPS SSP, page
•Removing and Installing the Power Supply Module, page
•Removing and Installing the Fan Module, page
•Installing the Slide Rail Kit Hardware, page
•Installing and Removing the Slide Rail Kit, page
•
•Installing the Cable Management Brackets, page
•Troubleshooting Loose Connections, page
•IPS 4500 Series Sensors and the SwitchApp, page
Installation Notes and Caveats
Pay attention to the following installation notes and caveats before installing the IPS 4510 and IPS 4520.
Note Read through the entire guide before beginning any of the installation procedures.
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
|
| ||
|
|