Cisco Systems IPS4520K9 Memory Configurations, Power Supply Module Requirements, Model, V Stby

Chapter 7 Installing the IPS 4510 and IPS 4520

Memory Configurations

Memory Configurations

The IPS 4510 and IPS 4520 have up to 6 DIMM modules per CPU. DIMM population is platform-dependent. Table 7-5shows the memory configurations.

Table 7-5 Memory Configurations

Model

IPS 4510

IPS 4520

Memory

24-GB DRAM

48-GB DRAM

Power Supply Module Requirements

Table 7-6lists the power supply module requirements.

Table 7-6	Power Supply Module Requirements
		50 V	12 V	3.3 V_STBY
Output Voltage
Maximum		52.0 V	12.2. V	3.45 V
Nominal		50.0 V	12.0 V	3.35 V
Minimum		48.0 V	11.8 V	3.25 V
Output Current @ 200 VAC
Maximum		17.3 A	27.0 A	1.5 A
Minimum		0	0	0
Output Current @ 100 VAC
Maximum		17.3 A	27.0 A	1.5 A
Minimum		0	0	0

Note The IPS 4520 requires two power supply modules.

Supported SFP/SFP+ Modules

The SFP/SFP+ module is a hot-swappable input/output device that plugs into the SFP/SFP+ ports and provides Gigabit Ethernet connectivity. The SFP and SFP+ modules are optional and not included with the IPS 4510 and IPS 4520. You can purchase them separately. For 1 Gb, you need SFP. For 10Gb, you need SFP+. The interfaces are called TenGigabitEthernet 0/x whether they are 10 Gb-enabled or not.

	Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01		7-11