Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems IPS4520K9 7-29, 15Pressing Down the Release Hook, Installing the IPS 4510 and IPS

Models: IPS4510K9

1 36

Download 36 pages 45.7 Kb

Page 29

Figure 7-15 Pressing Down the Release Hook

Chapter 7 Installing the IPS 4510 and IPS 4520

Installing and Removing the Slide Rail Kit

Step 3 Press down the release hook to remove the chassis from the rack (Figure 7-15).

Figure 7-15 Pressing Down the Release Hook

330564

		Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

	OL-24002-01			7-29
	OL-24002-01			7-29

Image 29

Cisco Systems IPS4520K9 7-29, 15Pressing Down the Release Hook, Installing the IPS 4510 and IPS, OL-24002-01, 330564

Contents

Installation Notes and Caveats ContentsInstalling the IPS 4510 and IPS C H A P T E RProduct Overview Chassis Features Removal screws Description Indicatorthe back panel IndicatorDescription Figure 7-4 shows the back panel features Indicator IndicatorDescription IN OKDimensions and Weight SpecificationsPower Indicator7-10 AccessoriesEnvironment Power Supply Module Requirements Memory ConfigurationsSupported SFP/SFP+ Modules Model1G SFP Module Installing the IPS 4510 and IPS10G SFP+ Module 7-12a.Install the SFP/SFP+ module 7-13Step 5 Install the electrical cables 7-147-15 Removing and Installing the Core IPS SSPFor More Information Module 7-167-17 Removing and Installing the Power Supply ModulePower supply module and power supply module handle 7-187-19 Removing and Installing the Fan Module7-20 Installing the Slide Rail Kit Hardware7-21 Installing and Removing the Slide Rail KitPackage Contents, page Installing the Chassis in the Rack, page7-22 Package ContentsInstalling the Chassis in the Rack Figure 7-9Square Studs for Square Hole Post 7-23Step 2 Secure the slide rail to the rack post with the provided #10-32screws by tightening the screws at the front and rear end of the slide rail to the rack post Figure 7-10.Both front and rear rack posts must be secured with the screws before you install the chassis 7-24Figure 7-11Installing the #10-32Cage Nuts 7-25Step 4 Install the chassis on the outer rail. Make sure that the U-barsare aligned to the outer rail evenly, then push the chassis into the rack Figure 7-26Figure 7-13Securing the Chassis to the Outer Rail 7-277-28 Removing the Chassis from the RackChapter 7 Installing the IPS 4510 and IPS 7-29Installing and Removing the Slide Rail Kit Figure 7-15Pressing Down the Release HookPower off the sensor 7-30Bracket 7-31Step 12 Reattach the power cable to the sensor 7-327-33 Installing the Cable Management Brackets7-34 Troubleshooting Loose Connections7-35 IPS 4500 Series Sensors and the SwitchAppChapter 7 Installing the IPS 4510 and IPS IPS 4500 Series Sensors and the SwitchAppChapter 7 Installing the IPS 4510 and IPS 7-36IPS 4500 Series Sensors and the SwitchApp OL-24002-01