Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems IPS4510K9, IPS4520K9 specifications 7-24

Models: IPS4510K9

1 36

Download 36 pages 45.7 Kb

Page 24

Image 24

Step 2 Secure the slide rail to the rack post with the provided #10-32 screws by tightening the screws at the front and rear end of the slide rail to the rack post (Figure 7-10). Both front and rear rack posts must be secured with the screws before you install the chassis.

Chapter 7 Installing the IPS 4510 and IPS 4520

Installing and Removing the Slide Rail Kit

Step 2 Secure the slide rail to the rack post with the provided #10-32 screws by tightening the screws at the front and rear end of the slide rail to the rack post (Figure 7-10). Both front and rear rack posts must be secured with the screws before you install the chassis.

Caution It is critical that the screws are installed and secured to the front and rear end of the slide rails.

Figure 7-10 Securing the Slide Rail to the Rack Post

332655

	Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
7-24	OL-24002-01

Page 24

Image 24

Cisco Systems IPS4510K9, IPS4520K9 specifications 7-24

Contents

Contents Installation Notes and CaveatsInstalling the IPS 4510 and IPS C H A P T E RProduct Overview Chassis Features Removal screws Indicator DescriptionIndicator Descriptionthe back panel Figure 7-4 shows the back panel features Indicator IndicatorDescription IN OKSpecifications Dimensions and WeightPower IndicatorAccessories Environment7-10 Memory Configurations Power Supply Module RequirementsSupported SFP/SFP+ Modules ModelInstalling the IPS 4510 and IPS 1G SFP Module10G SFP+ Module 7-127-13 a.Install the SFP/SFP+ module7-14 Step 5 Install the electrical cablesRemoving and Installing the Core IPS SSP For More Information7-15 7-16 ModuleRemoving and Installing the Power Supply Module 7-177-18 Power supply module and power supply module handleRemoving and Installing the Fan Module 7-19Installing the Slide Rail Kit Hardware 7-20Installing and Removing the Slide Rail Kit 7-21Package Contents, page Installing the Chassis in the Rack, pagePackage Contents Installing the Chassis in the Rack7-22 7-23 Figure 7-9Square Studs for Square Hole Post7-24 Step 2 Secure the slide rail to the rack post with the provided #10-32screws by tightening the screws at the front and rear end of the slide rail to the rack post Figure 7-10.Both front and rear rack posts must be secured with the screws before you install the chassis7-25 Figure 7-11Installing the #10-32Cage Nuts7-26 Step 4 Install the chassis on the outer rail. Make sure that the U-barsare aligned to the outer rail evenly, then push the chassis into the rack Figure7-27 Figure 7-13Securing the Chassis to the Outer RailRemoving the Chassis from the Rack 7-287-29 Chapter 7 Installing the IPS 4510 and IPSInstalling and Removing the Slide Rail Kit Figure 7-15Pressing Down the Release Hook7-30 Power off the sensor7-31 Bracket7-32 Step 12 Reattach the power cable to the sensorInstalling the Cable Management Brackets 7-33Troubleshooting Loose Connections 7-34IPS 4500 Series Sensors and the SwitchApp 7-35Chapter 7 Installing the IPS 4510 and IPS IPS 4500 Series Sensors and the SwitchApp7-36 Chapter 7 Installing the IPS 4510 and IPSIPS 4500 Series Sensors and the SwitchApp OL-24002-01