Chapter 7 Installing the IPS 4510 and IPS 4520
Installing the IPS 4510 and IPS 4520
b.Connect one end of the LC cable to the SFP/SFP+ module.
9 8 7
6
SFP/SFP+
253907
c.Connect the other end of the LC cable to a network device, such as a router or switch.
Step 5 Install the electrical cables.
a.Attach the power cable to the power supply module on the back of the sensor.
Cisco ASA 1200W AC
IN | FAN |
| ||||
15.0/8.0.A | OUT | |||||
OK | ||||||
56/60Hz | INPUT FAN | OK | FAIL | |||
| OUTPUT | |||||
|
|
|
|
Cisco ASA 1200W AC
253972
OK | FAN | OUT | |
15.0/8.0.A | |||
56/60Hz | IN | OK | FAIL |
|
b.If you have redundant power supply modules, you must connect both power cables to the back of the sensor.
1 | 2 |
Cisco ASA 1200W AC | Cisco ASA 1200W AC |
IN | FAN | OUT |
OK | OK | FAIL |
IN | FAN | OUT |
OK | OK | FAIL |
1
Power supply module (PS0)
2
Power supply module (PS1)
c.Plug the power cable(s) in to a power source (we recommend a UPS).
| Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1 |
|