Cisco Systems IPS4510K9 manual IPV4

Appendix B Signature Engines

					Atomic Engine
	Table B-8	Atomic IP Advanced Engine Parameters (continued)
	Parameter		Description		Value
	specify-routing-header {yes		(Optional) Enables inspection of the		have-rh no-rh
	no}		routing header:
			• rh-present—Inspects the routing
				header.
	specify-traffic-class {yes no}		(Optional) Enables inspection of the traffic		0 to 255
			class:
			• traffic-class—Specifies the value of
				the traffic class to inspect.
	IPV4
	specify-ip-addr-options {yes		(Optional) Enables IP address options:		address-with-localhost
	no}		•	ip-addr-options—Specifies the IP	ip-addr2
				address options.	rfc-1918-address
					src-ip-eq-dst-ip
	specify-ip-header-length {yes		(Optional) Enables inspection of the IP		0 to 16
	no}		header length:
			• ip-header-length—Specifies the length
				of the IP header to inspect.
	specify-ip-id {yes no}		(Optional) Enables inspection of the IP		0 to 255
			identifier:
			• ip-id—Specifies the IP ID to inspect.
	specify-ip-option-inspection		(Optional) Enables inspection of the IP		0 to 65535
	{yes no}		options:
			•	ip-option-inspection—Specifies the
				value of the IP option:
				– ip-option—IP OPTION code to
				match.
				– ip-option-abnormal—The list of
				options is malformed.
	specify-ip-payload-length {yes		(Optional) Enables inspection of the IP		0 to 65535
	no}		payload length:
			•	ip-payload-length—Specifies the
				length of the IP payload to inspect.
	specify-ip-tos {yes no}		(Optional) Enables inspection of the IP		0 to 255
			type of service:
			• ip-tos—Specifies the IP type of service
				to inspect.
	specify-ip-total-length {yes		(Optional) Enables inspection of the IP		0 to 65535
	no}		total length:
			• ip-total-length—Specifies the total
				length of the IP packet to inspect.
		Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01						B-21