Zanussi DE 6744 S manual To change the level, press, Example, Use salt from level 2 upwards

The current level is indicated by the number of
flashes made by the		INTENSIVE SID 80	indicator
light, that alternates 5 seconds off with a number of
flashes, this for about 60 seconds.
Example:
1 flash	= level 1

2 flashes = level 2

3 flashes = level 3

4 flashes = level 4

5 flashes = level 5

3. To change the level, press the	INTENSIVE SID 80
programme push button. Each time the push
button is pressed the level changes.

Example:

if the current level is 3, by pressing the

INTENSIVE SID 80 programme push button once, level 4 is selected.

The	INTENSIVE SID 80	indicator light remains off
for	about 5 seconds after which it starts flashing
indicating the new level selected.

4.To memorise the new level, switch off the

dishwasher by pressing the ON-OFF push button.

If your water is level 1 it is already soft and therefore there is no need to use salt. With the setting of the water softener at level 1 the salt indicator light on the control panel will always remain off.

Use salt from level 2 upwards.

From level 2 upwards, if salt refilling is necessary, the salt indicator light will illuminate only in setting mode and at the end of the washing programme.

During the run of the programme it will remain off.

7