- 5 -
Description of the appliance
Push-button switches
– After selecting the wash programme and
temperature, push this button in to start the machine.
(See 8, Indicator light).
– An optional function which increases the
volume of water for rinsing in Cotton programmes,
and adds one extra rinse.
– An optional function. When this button is
pressed in, the programme will stop at the end of
the last rinse, and the rinse water will be retained
in the machine. This function is available for the
Synthetics, Delicate, and Wool programmes, to
minimise creasing in synthetic fibres. Once the
programme has stopped on rinse-hold, if you wish
to end the wash with both emptying of water and
spinning of the load, press the option button again
so it pops out. If you wish to end the wash by
emptying the water without spinning, you have to
advance the programme control knob manually,
to programme setting L. Before you advance the
programme control knob manually, we recommend
that you first press the On/Off button to switch the
machine off (button pops out). Once the programme
control knob is set at L, press the On/Off button
again (button remains in) to complete the programme.
– An optional function which reduces the
maximum spin speed:
Cotton programme: 1100 ➔600 rpm.
Synthetics/Delicate programmes: 600 ➔400 rpm.
Knob controls and detergent dispenser
Temperature control – For setting temperatures
between and 90°. Follow care label recommen-
dations.
Programme control – For setting programme
type.
See Programme Chart.
Detergent dispenser– With separate compartments
for detergent and fabric conditioner. Pre-wash
detergent is to be added straight into the drum,
using a dosing device.
Indicator light – Comes on approx. 5 seconds
after the ON/OFF button is pressed, when the
door is locked electrically and the machine starts.
The light goes out approx. 2–3 minutes after the
end of the programme and the door is unlocked.
1
2
3
4
5
6
7
8
7 8 1 432 5 6

The control panel