Operating Sequence
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
P0004
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The light above the button will light up.
N | / | O | F |
O |
|
| |
|
|
| F |
5.Select the desired programme/ fabric
Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up.
The lights relevant to the phases that form the programme will light up.
The START/PAUSE button light will start flashing.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment 
.
If you wish to carry out the prewash, pour detergent into the appropriate compartment marked 
.
COTTONS SYNTHETICS
DELICATES
WOOL 
F | S |
ABRIC | |
PREWASH 
WASH 
RINSES 
RINSE HOLD 
SPIN 
DRAIN
FILTER END
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
, without exceeding the «MAX» mark.
6. Select the temperature
Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine.
C0064 |
C0065 |
The relevant light will light up.
90°C
60°C
50°C
40°C
30°C
T |
| R | E |
E | T |
| |
M |
| ||
| P ERA | U |
|
Close the drawer gently.
9
