Select the required wash programme, Start the machine

5 Select the required wash programme

Suppose you have 2 kg of synthetic fabric laundry to wash. They are rather delicate fabrics and should not be washed at a high temperature.

1 Load the laundry

Open the door by pulling the catch outward.

Load the items one at a time and close the door.

P0215a

Turn the programme selector dial clockwise to the required programme.

P0004

2 Measure out the detergent

Before starting up the machine check that:

■the appliance is plugged in

■the water supply taps are turned on

■the drain hose is correctly and securely positioned

■the door and the detergent dispenser drawer are closed.

P0257

P0205

P0215b

Pull the programme selec- tor dial outwards: the mains-on light illuminates and the machine starts operating.

Pull out the detergent dispenser drawer from the control panel. Measure out the amount of detergent required and pour into the main wash compartment.

3 Add the fabric softener if required

The machine stops automatically and the mains-on light goes out.

If you have depressed the Rinse Hold button, the ma- chine will stop with the water left in the tub, to prevent

P0204

Pour the fabric softener, if required, into the compart-

ment marked .

Do not exceed the MAX level and then close the drawer gently.

the fabric from creasing. To drain the water release the same button (the clothes will be gently spun) or select programme P.

The door is controlled by a safety device which releases 2 minutes after the end of the programme.

Switch the machine off by depressing the programme selector dial.

When the programme has finished you are advised to unplug the appliance and turn off the water taps.

Depress Rinse Hold or Spin Reduction, if desired.