1,5 m. Maximum
IMPORTANT: The distance from the floor to the highest part of the hose should be between 60 to 90 cm. (It is advised to be between 60 and 70 cm). The hose must not be bent nor twisted to avoid clogging. Should a prolongation of the discharging hose be unavoidable this must never surpass 1.5 m and must be of the same diameter as the original hose.
Make sure the hoses are not too tense.
LEVELLING
Level the appliance by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case. Accurate levelling will prevent vibration, noise and displacement of the appliance during operation.
Some vibration is inevitable, especially if placed on a wooden floor. Wooden floors are particularly susceptible to vibrations. For advice, consult a builder. If posible always place the appliance on a solid floor.
Minimum | Maximum |
cm. | cm. |
60 | 90 |
ELECTRICAL CONNECTIONS
Before plugging the appliance make sure that:
1º the mains of your installation is the same as on the rating plate of your appliance (the plate is sticked to the rear of the appliance).
2º The meter, the fuses, the wiring and the socket outlet can support the max. power absorbed stated on the rating plate.
3º The socket base and the plug must fit in adequately without any reducing interposition, multiple outlets or adapters. If necessary replace the socket outlet by an adequate one.
The applicable rules for electrical security require an adequate earthing. The plug of the appliance is provided with such a device.
Make sure your socket outlet is provided with an adquate earthing too.
The manufacturer declines any liability in case of accidents or incicents should these safety measures not be observed.
(Never touch the washing machine or any electric appliance while standing on a wet floor or being barefoot.)
25
