ELECTRICAL CONNECTIONS
WARNING: This appliance must be earthed. The manufacturer declines any liability should this safety measure not be observed.
Before you use your appliance, check that the voltage shown on the data plate inside the cabinet conforms with your mains supply.
The mains lead of the appliance is fitted with a non- rewireable
The old fuse should be replaced by a 13 amp ASTA approved BS1362 fuse and the fuse cover/carrier must be refitted before the plug is used again.
If the plug fitted is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | - | Earth |
Blue | - | Neutral |
Brown | - | Live |
The wire coloured green and yellow (earth) must be | |
connected to the terminal in the plug which is marked | |
with the letter «E» or the earth symbol | or coloured |
green and yellow. |
| |
The wire coloured blue (neutral) must be connected | Fig. 4 | |
to the terminal in the plug which is marked with the | ||
| ||
letter «N» or coloured black. |
| |
The wire coloured brown (live) must be connected to |
| |
the terminal in the plug which is marked with the letter |
| |
«L» or coloured red. |
| |
Upon completion, there must be no cut, loose or stray |
| |
stands of wire present and the cord clamp must be |
| |
secure over the outer sheath. |
| |
If the supply cable of this appliance is damaged, it |
| |
must be replaced by special cord (spare part ref. |
| |
567364415) that can be obtained from your local |
| |
Zanussi Service Centre. |
|
7
