Zanussi SIP 3.0.2 manual Cleaning the outside of the appliance, Hob Surface, General information

•Cleaners that contain bleach should not be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided. Multi-surface anti-bacterial cleaning products should not be used on the ceramic hob or on the surrounding trims.

Cleaning the outside of the appliance

!WARNING!

Before cleaning always allow the appliance to cool down before switching off at the electricity supply.

•Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, control knobs, handles, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.

•Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

!WARNING!

Do not attempt to remove any of the control knobs from the appliance as this may cause damage and is a safety hazard.

Cleaning the solid hob (ZCE560DW)

Clean the hob after each use. To ensure the best results from your hob and to prolong its good looks regular cleaning and maintenance is essential. Cleaning and maintenance should only be carried out when the hob is cool.

Hob Surface

Hob surface should be cleaned with a lukewarm solution of water and a mild detergent, periodically it may be necessary to use a mild scouring agent. Dust, fat and liquids from food that has boiled over must be removed as soon as possible. Never use a scouring pad on the hob surface and on no occasion use a sharp object.

Scratched or clipped surface cannot be repaired. In additional to the unsightly appearance this may lead to grooves appearing and eventually the enamel to crack.

Plates

To clean solid plates, firstly wipe off any excess spillage and if necessary clean the plates with a light abrasive pad than dry the plates thoroughly.

General information

•Drying may be facilitated by turning the plates onto the lowest setting for a short time until dry.

•Do not put any damp or wet items on the hotplates.

•Dry pots and pans with a cloth before placing them on the hotplates.

Cleaning the ceramic hob (ZCV561DW/DX,

ZCV563DW/DX/DN)

•Make sure the ceramic glass is cool before cleaning. It is important to clean the ceramic hob daily to prevent foodstuff being burnt on.

•Take care to avoid the hob trims when cleaning the ceramic glass as they may be damaged by the cleaning agents.

Daily cleaning

•Use a hob-cleaning product specifically designed for ceramic hobs daily. If foodstuff is not allowed to burn on it will be much easier to clean off.

•Apply a small amount of hob cleaner in the centre of each area to be cleaned.

•Dampen a clean paper towel or a plastic pad designed for non-stick saucepans and rub vigorously until all marks are removed. This may take a few minutes.

•Wipe off residues of cleaner with another damp paper towel and polish dry with a soft cloth.

•If hob cleaner is unavailable, one or more of the

cleaning agents below may be used temporarily:

-Cream Cleaner

-Baking Soda

To remove more stubborn marks

•Cream cleaner may be used to clean off more stubborn stains or to remove discolouration.

•It may be necessary to rub the marks hard for several minutes.

•Use a plastic pad designed for non-stick saucepans with cream cleaner for removal of more stubborn stains.

16