GETTING TO KNOW YOUR MACHINE
Control panel
ZANUSSI
12
1Programme chart
2Water Full Indicator Light (red)
This light illuminates when the reservoir is full or improperly fitted.
The programme will be interrupted.
3 Door Open Button
Depress this button to open the door.
The door of the machine can be opened at any time during the programme if you want to feel the dryness of the fabrics.
DRYING TIME
DOOR
OPEN
3 | 4 | 5 |
4 Mains On Light (green) 
The pilot light indicates operating status.
5 On/OffDial - Time Selector Dial
Turn the dial clockwise (to the right) to select the time for drying (see Chart page 9). At the same time the machine is switched on and the programme starts.
This dryer has two drying cycles of up to 120 and 80 minutes, giving a high or low heat temperature accord- ing to the fabric type.
When selecting the drying time you should remember that it includes a 12 minute cooling phase (position
on the dial).
This phase should not be shortened, stopped or avoid- ed, as this could cause skin burns or damages to the laundry.
Additional drying
If, at the end of the programme, the laundry is still too damp, set the dial for a further period of drying (remembering to take into account the cooling period).
8
