- 11 -
Something not working
The dryer will not start.
The load is not drying properly, or is taking
too long to dry.
The area around the dryer is hot.
■Has the dryer no power supply?
■Check circuit-breakers/fuses (start with fuse in electrical plug).
■Is the door closed properly?
■Is the program/timer knob in the 0 position?
■Is the water tank full?
■Was the time set not long enough?
■Is the fluff filter clogged?
■Is the condenser clogged?
■Was the load not spun enough in the washing machine?
■Have you been using the ”Synthetics” setting (on the timer)
(lower drying temperature)?
■Is the temperature in the room too high?
■Is the room too small? (Improve the room ventilation, open a
door or window or choose another site for the dryer.)

Symptom Check

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
IMPORTANT!If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Never attempt to repair the tumble dryer
yourself.Repairs carried out by unauthorised or
inexperienced persons can cause injury or
serious malfunctioning.