Choosing where to install the dryer
You can install this dryer in a number of different ways. We will show you the most suitable of these. Whichever way you install it, here are some points to bear in mind:
•Always ensure that the dryer is level.
•The temperature in the room should not exceed +35°C when the dryer is operating. If it does, open a door or window while the dryer is on.
•The area around the dryer should be as
•If you install the dryer with its door hinge side towards a wall, or next to a cupboard or wall unit which is more than 370 mm deep, you will need to leave a space on the hinge side at least 30 mm wide. This is to allow the door to open wide enough for removing the water tank.
•Ensure the air ducts are not obstructed.
Worktop installation
If you prefer to install your dryer on a worktop, you must anchor it at the top rear to prevent it from tipping forwards.
Method:
•Begin by placing the dryer on the worktop in the position where it is to be installed.
•Level the dryer with the aid of its adjustable feet.
•On the wall, mark the position of the hole needed for the screw eye. The correct place is opposite the centre of the
•Screw the screw eye supplied (1) into place. Once in place, the “eye” (aperture) of the screw eye needs to be 40 mm from the wall.
•Position the dryer so that the eye is correctly aligned in the bracket.
•Fit the pin (2) through bracket and eye, and lock it in place with the
The adjustable feet must not be removed. They ensure that there is adequate ventilation underneath the dryer.
Electrical supply
The dryer is supplied with a lead and electrical plug for connection to an earthed wall socket, 240 V, 13 A. If the dryer is to have fixed wiring to the electrical supply, this should only be carried out by a qualified electrician or competent person.
31
2 
40 mm |
- 15 -
