Zanussi TH 500 manual Clearance Height, Unpacking, Positioning, Venting

Clearance Height

A minimum clearance height of 650mm

(25 1/2”) is required when installed above a built-in electric hob, or 700mm (27 1/2”) when installed above a built-in gas hob.

A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm (30 1/2”) when installed above a slot-in gas oven.

When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm, a gap of 50mm must be maintained either side of the hob.

	Hob
A: Built-in Electric Hob:	650mm minimum clearance
B: Built-in Gas hob:	700mm minimum clearance
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot-in Gas Cooker:	787mm minimum clearance

This cooker hood must not be installed above a cooking appliance with a high level grill.

Unpacking

Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.

Positioning

This cooker hood is designed to be fitted into a cabinet which should have a minimum depth 28 cm and width 60 cm.

Venting

The hood is more effective when used in the extraction setting (ducted to the outside).

Venting kits maybe purchased through

your retailer or DIY store, and must be ducted to an outside vent of 100mm (4”) minimum.

The ducting used must be manufactured from fire retardant material which should conform to the relevant British Standard or DIN4102-B1.

When the hood is ducted externally the charcoal filter must be removed and the slider control must be in the ducting position.

12