Zanussi TL1410DXP, TL1810DXP, TL1410SXP, TL1810SXP dimensions 1400&1800 mm, Range Composition

RANGE

COMPOSITION

The range consists of 4 models of work tables with upstand and a bowl positioned on the right or left hand side, 1400 or 1800 mm in length. The highly modular design of the tables guarantees a rational solution to any food preparation or support function in the professional kitchen. Upstand with 8 mm radioused corner, 100 mm high and 13 mm deep, designed to be used against a wall.

Model 132200+855300

1400&1800 mm

WORK TABLES WITH BOWL ZANUSSIP R O F E S S I O N A L

FUNCTIONAL AND CONSTRUCTION FEATURES

� The 40 mm high worktop in 304

AISI stainless steel, 10/10 in

thickness, incorporates a layer of

sound deadening material, has

upturned edges to protect the

kitchen worker and a reinforced,

waterproof under panel.

� Square section legs and 1"

height-adjustable feet (40 mm) in

304 AISI stainless steel to allow

perfect alignment with other food

wide, a lower shelf, a three sided underframe and a set of castors as an alternative to the feet. Different taps are avialable to suit every need.

�The drawers, in 304 AISI stainless steel with a one-piece interior and rounded corners for greater hygiene and ease of cleaning, are designed to contain GN containers with a maximum height of 100 mm. They have a maximum load capacity of 40 kg.

�The lower shelf, 40 mm in thickness, slots easily into place, without the use of tools, at a height

of 200 mm from the floor. Smooth shelves are normally supplied, perforated ones are available on request. For installation of the chest of drawers the lower shelf must be ordered as well.

�All models comply with the more strict international standards as far as hygiene and cleanability are concerned.

preparation equipment.

� The single-pressed bowl (400 x

400 x 200 mm) is supplied as

standard with an overflow pipe and

drain hole.

� Ease and speed of installation

guaranteed by the fact that the table

top slots into the legs without using

screws.

� All work tables can be fitted, as

optional extras, with a single drawer

either 400 or 600 mm wide, a chest

of 4 drawers either 400 or 600 mm

TECHNICAL DATA
CHARACTERISTICS		MODELS
	TL1410DXP	TL1410SXP	TL1810DXP	TL1810SXP
	132300	132301	132306	132307
External dimensions - mm
width	1400	1400	1800	1800
depth	700	700	700	700
height	1000	1000	1000	1000
Worktop thickness - mm	50	50	50	50
Upstand dimensions - mm
height	100	100	100	100
depth	13	13	13	13
radius	R=8	R=8	R=8	R=8
Bowls - n.	1	1	1	1
Bowl dimensions (wxdxh) - mm	400x400xH200	400x400xH200	400x400xH200	400x400xH200
Net weight - kg.	45	45	54	54