Door reversal
1.Unplug the appliance from the power supply before carrying out the
2.Remove the ventilation grill (D).
3.Unscrew the bottom hinge (E).
4.Remove the door by releasing it from the top hinge pin (A).
5.Remove the pin then mount it on the opposite side, after having removed the plugs which must be refitted on the other side.
6.Refit the door.
7.Screw down the bottom hinge (E) on the opposite side by using the screws previously removed.
8.Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side.
9.
Important
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier on a low setting.
Inner door reversal
Using a screwdriver release bracket (1) by pressing on the internal spring and withdraw it from its seat together with the door;
1.remove plug (2) and fit it in the hole left open on the opposite side;
2.turn the door through 180¡, remove the bracket
(1) and refit it on the opposite side.
3.Refit the door and insert the top pin and bottom bracket (1), pushing it into place.
4.To ensure correct storage of food, the door is fitted with a simple spring device which holds it in the open position until it is properly closed.
E | F |
| |
F |
|
| F |
D |
|
F |
|
A
D736 |
D737 |
180° |
2 |
1 |
PR140 |
19
