Zanussi ZBA7190A Electrical connection, Door reversibility, Installing the appliance, Climate

Models: ZBA7190A

1 12
Download 12 pages 13.74 Kb
Page 8
Image 8
Climate

Climate

Ambient temperature

class

 

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

Door reversibility

The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance:

• Loosen the upper pin

• Remove the door.

and remove the spacer.

• Loosen the lower pin.

• Remove the upper pin

 

and the door.

 

On the opposite side:

Install the lower pin.

Install the door.

Tighten the spacer and tighten the upper pin.

Ventilation requirements

The airflow behind the ap- pliance must be sufficient.

50 mm

min.

 

200 cm2

 

min.

 

200 cm2

Installing the appliance

Caution! Make sure that the mains cable can move freely.

Do the following steps:

8

Page 8
Image 8
Zanussi ZBA7190A user manual Electrical connection, Door reversibility, Installing the appliance, Climate, class