Zanussi ZBA7190A Operation, Daily use, Care and cleaning, Installation, Service, Switching on

Models: ZBA7190A

1 12
Download 12 pages 13.74 Kb
Page 3
Image 3
Daily use

or damaged power plug may overheat and cause

a fire.

3.Make sure that you can come to the mains plug of the appliance.

4.Do not pull the mains cable.

5.If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.

6.You must not operate the appliance without the lamp cover1) of interior lighting.

This appliance is heavy. Care should be taken when moving it.

Do not remove nor touch items from the freezer com- partment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

Avoid prolonged exposure of the appliance to direct sunlight.

Daily use

Do not put hot pot on the plastic parts in the appliance.

Do not store flammable gas and liquid in the appliance, because they may explode.

Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instruc- tions.

Care and cleaning

Before maintenance, switch off the appliance and dis- connect the mains plug from the mains socket.

Do not clean the appliance with metal objects.

Regularly examine the drain in the refrigerator for de- frosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the ap- pliance.

Installation

Important! For electrical connection carefully follow the instructions given in specific paragraphs.

Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged.

Operation

Report possible damages immediately to the place you bought it. In that case retain packing.

It is advisable to wait at least four hours before con- necting the appliance to allow the oil to flow back in the compressor.

Adequate air circulation should be around the appli- ance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.

Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn.

The appliance must not be located close to radiators or cookers.

Make sure that the mains plug is accessible after the installation of the appliance.

Connect to potable water supply only.2)

Service

Any electrical work required to do the servicing of the appliance should be carried out by a qualified electri- cian or competent person.

This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant cir-

cuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang- er. The materials used on this appliance marked by the

symbol Care and cleaningInstallation are recyclable.

Switching on

Insert the plug into the wall socket.

1)If the lamp cover is foreseen

2)If a water connection is foreseen

Turn the Temperature regulator clockwise to a medium setting.

3

Page 3
Image 3
Zanussi ZBA7190A Operation, Daily use, Care and cleaning, Installation, Service, Environment Protection, Switching on