Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant cir-

cuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The

insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang- er. The materials used on this appliance marked by the

symbol are recyclable.

Operation

Switching on

Insert the plug into the wall socket.

Turn the Temperature regulator clockwise to a medium setting.

Switching off

To turn off the appliance, turn the Temperature regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated. To operate the appliance, proceed as follows:

•turn the Temperature regulator toward lower settings to obtain the minimum coldness.

•turn the Temperature regulator toward higher settings to obtain the maximum coldness.

A medium setting is generally the most suitable.

However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:

•room temperature

•how often the door is opened

•the quantity of food stored

•the location of the appliance.

Important! If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.

First use

Cleaning the interior

Before using the appliance for the first time, wash the inte- rior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Important! Do not use detergents or abrasive powders, as these will damage the finish.

Daily use

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. To freeze fresh foods it is not necessary to change the me- dium setting.

However, for a faster freezing operation, turn the tempera- ture regulator toward higher settings to obtain the maxi- mum coldness.

Important! In this condition, the refrigerator compartment temperature might drop below 0°C. If this occurs reset the temperature regulator to a warmer setting.

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours on the higher settings.

If large quantities of food are to be stored, remove all drawers and baskets from appliance and place food on cooling shelves to obtain the best performance.

Warning! Make sure that foods do not exceed the load limit stated on the side of the upper section

(where applicable)

4

Page 3 Page 5
Page 4
Image 4
Zanussi ZBB2294L, ZBB2294R user manual Operation, First use, Daily use
Page 3 Page 5

ZBB2294R, ZBB2294L specifications

The Zanussi ZBB2294L and ZBB2294R are two cutting-edge built-in refrigerators designed to provide efficient cooling while seamlessly blending into modern kitchen designs. These models are part of Zanussi’s commitment to combining practicality with aesthetic appeal, ensuring that homeowners have access to reliable refrigeration without compromising on style.

One of the standout features of both the ZBB2294L and ZBB2294R is their impressive storage capacity. These refrigerators offer ample space to organize food and beverages, equipped with adjustable shelves, crisper drawers for fruits and vegetables, and dedicated compartments for dairy products. This flexibility allows users to customize their storage according to their needs, making it easier to keep perishable items fresh and accessible.

In terms of energy efficiency, the ZBB2294L and ZBB2294R are designed with the latest technology to minimize power consumption. They boast an A+ energy rating, ensuring that users can enjoy a reliable cooling solution while lowering their electricity bills. This efficiency is complemented by the intelligent cooling system that maintains consistent temperatures throughout, preventing fluctuations that could lead to spoilage.

Both models feature an advanced frost-free system, which eliminates the need for manual defrosting. This technology ensures that ice buildup is minimized and provides users with a hassle-free experience. Additionally, the efficient cooling circulation guarantees that air is evenly distributed within the refrigerator, enhancing food preservation.

A notable characteristic of these models is their stylish design, with a sleek finish that can easily integrate into any kitchen decor. The reversible door feature adds further flexibility, allowing homeowners to position the refrigerator in a way that best suits their kitchen layout.

For added convenience, Zanussi has included features like interior LED lighting, which not only illuminates the contents for easy access but also uses less energy than traditional lighting solutions. A user-friendly control panel provides easy adjustments to temperature settings, putting you in control of your refrigeration experience.

In conclusion, the Zanussi ZBB2294L and ZBB2294R stand out for their ample storage, energy efficiency, advanced cooling technologies, and elegant design. They make an excellent choice for anyone looking to upgrade their kitchen with a built-in refrigeration solution that meets modern demands while offering reliability and convenience. These models exemplify Zanussi’s dedication to enhancing the kitchen experience for homeowners and culinary enthusiasts alike.
Top Page Image Contents