Zanussi ZBB2294L, ZBB2294R Door reversibility, Installing the appliance, Loosen the upper pin

Models: ZBB2294R ZBB2294L

1 16
Download 16 pages 50.46 Kb
Page 10
Image 10
Door reversibility

The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the do- mestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance:

Loosen the upper pin

• Loosen the middle

 

and remove the spacer.

hinge.

Remove the upper pin

 

 

and the upper door.

 

Remove the lower door.

Loosen the lower pin.

On the opposite side:

Install the lower pin.

Install the lower door.

Tighten the middle hinge.

Install the upper door.

Tighten the spacer and tighten the upper pin.

Ventilation requirements

The airflow behind the ap- pliance must be sufficient.

50 mm

min.

 

200 cm2

 

min.

 

200 cm2

Installing the appliance

Caution! Make sure that the mains cable can move freely.

Do the following steps:

10

Page 10
Image 10
Zanussi ZBB2294L, ZBB2294R Door reversibility, Installing the appliance, Loosen the upper pin, Remove the upper pin