Zanussi ZBF 260 manual Something not working, Symptom, Solution

Something not working

If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM	SOLUTION
„ The oven does not come on	‹ Check the oven is in manual operation and that both
	acookingfunctionandtemperaturehavebeenselected.
	‹ Check the oven is wired in properly, and the socket
	switch or the switch from the mains supply to the oven
	are ON.
„ The oven temperature light does not come on	‹ Select a temperature with the thermostat control knob
	‹ Select a function with the oven function control knob.
„ The oven light does not come on	‹ Select a function with the oven function control knob
	‹ Check the light bulb, and replace it if necessary (see
	"Replacing the Oven Light")
„ It takes too long to finish the dishes, or they are	‹ The temperature may need adjusting
cooked too fast.	‹ Refer to the contents of this booklet, especially to the
	chapter “Using the Oven”.
„ Steam and condensation settle on the food and the	‹ Leave dishes inside the oven no longer than 15-20
oven cavity.	minutes after the cooking is completed.
„ The electronic programmer does not work	‹ Check the instructions for the timer.
„ The oven fan is noisy	‹ Check that shelves and bakeware are not vibrating in
	contact with the oven back panel.

If after all these checks, the oven still does not work, contact your local Service Force Centre quoting your model and serial number, which can be found on the rating plate. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guaranteecustomersshouldensurethattheabove checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

14