Zanussi ZBF 569 Installation, Electrical Connection, Technical Data, This Oven Must be Earthed

Installation

The oven must be installed according to the instructions supplied.

This oven must be installed by qualified personnel to the relevant British Standards.

Technical Data Heating elements rating

Dimensions of recess

Inner Grill element 1,650 W

Height	undertop: 593 mm; in column 580 mm		Full Grill element	2,450 W
			Thermal Grilling	2,480 W
Width		560 mm
Depth		550 mm	Convection element	2,000 W
			Oven Light	25 W
Dimensions of the oven cavity			Cooling Fan	25 W
Height		335 mm	Convection Fan	25 W
Width		395 mm	Total Rating	2,500 W
Depth		400 mm
			Supply voltage (50 Hz)	230 V
Oven capacity		53 litres

Electrical Connection

The oven is designed to be connected to 230 V (50 Hz) electricity supply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L		-	Live terminal
Letter N		-	Neutral terminal
	or E	-	Earth terminal

THIS OVEN MUST BE EARTHED

The cable used to connect the oven to the electrical supply must comply to the specifications given below.

For Uk use only

Connection	Min. size	Cable / flex	Fuse
via	Cable/flex	type
• 13 A socket	2.5 mm2	3 core	13 A
outlet		butyl	min.
• 13 A		insulated
spur box
• Cooker	2.5 mm2	PVC/PVC	15 A min.
Control		twin and	20 A max.
Circuit		earth

It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The switch must not break the yellow and green earth cable at any point.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50 °C above the ambient temperature.

Before the oven is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed.

Themanufacturerdisclaimsanyresponsibilityshould these safety measures not be carried out.

For Europe use only

Min. size Cable/flex	Cable / flex type	Fuse
1.5 mm2	H07 RN-F, H05 RN-F,	13 A
	H05 RR-F, H05 VV-F,
	H05 V2V2-F (T90),
	H05 BB-F

21