Zanussi ZBQ 665 manual Installation, Electrical Connection, Technical Data Heating elements rating

Installation

The oven must be installed according to the instructions supplied.

This oven must be installed by qualified personnel to the relevant British Standards.

Technical Data		Heating elements rating
Dimensions of recess		Oven elements	1,880 W
		Top element	835 W
Height	580 mm.
Width	560-570 mm.	Bottom element	1,045 W
Depth	550 mm.	Convection element	2,088 W
		Inner Grill element	1,830 W
Dimensions of the oven cavity		Double Grill element	2,660 W
Height	325 mm.	OvenLight	15 W
Width	420 mm.	Cooling Fan	25 W
Depth	390 mm.
		ConvectionFan	30 W
Oven capacity	53 litres
		Total Rating	2,700 W
		Supply voltage (50 Hz)	230-240 V

Electrical Connection

The oven is designed to be connected to 230-240V (50Hz) electricity supply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L		-	Liveterminal
Letter N		-	Neutral terminal
	or E	-	Earth terminal

THIS OVEN MUST BE EARTHED

The cable used to connect the oven to the electrical supply must comply to the specifications given below.

For Uk use only

Connection	Min. size	Cable / flex	Fuse
via	Cable/flex	type
• 13 A socket	2.5 mm2	3 core	13 A
outlet		butyl	min.
• 13 A		insulated
spur box
• Cooker	2.5 mm2	PVC/PVC	15 A min.
Control		twin and	20 A max.
Circuit		earth

It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The switch must not break the yellow and green earth cable at any point.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient temperature.

Before the oven is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed.

Themanufacturerdisclaimsanyresponsibilityshould these safety measures not be carried out.

For Europe use only

Min. size Cable/flex	Cable / flex type	Fuse
1.5 mm2	H07 RN-F, H05 RN-F,	13 A
	H05 RR-F, H05 VV-F,
	H05 V2V2-F (T90),
	H05 BB-F

21