Zanussi ZCE 611 manual Setting the timer, Things to note

Models: ZCE 611

1 24
Download 24 pages 38.02 Kb
Page 9
Image 9
Setting the timer

Setting the timer

The timer can be used to time a set cooking period. At the end of the cook time the timer will automatically switch off the oven if in use.

The timer gives an audible signal at the end of any period of cooking up to 23 hours and 59 minutes.

To set the timer:

1.Press button “ ”: the display will read 0.00 and the

cookpot symbol (Things to note) will come on in the display (See Fig. 3).

2.Release button “ ” , then press and hold button “Manual background”. The AUTO symbol will come on in the display.

The display will count up in one minute intervals until the interval to be timed is reached, e.g. 30 minutes (See Fig. 4). The timer will begin to count down once set and the display will revert to the time of day.

3.At the end of the timed period, the oven will be switched off automatically and an acoustic alarm will

be heard. The cookpot symbol (Manual background) will go out, and the AUTO symbol will flash in the display (See fig. 5).

To switch off the acoustic alarm, press button “Manual background”. Then press button “Manual background” once again: the AUTO symbol will go out.

NOTE: remember to turn the oven function and the thermostat control knob to zero when cooking is over.

To reset the timer:

1.Press button “ ”, then proceed as described above.

To cancel the timer:

1.Press and release button “ ”. Then press and hold button “ ”: the display will count down in one minute intervals to 0.00. The AUTO symbol will go out.

2.Release button “ ”. After a few seconds the display will revert to the time of day and the cookpot symbol

(Manual background) will go out.

If the oven is in use, it will switch OFF after a few seconds. To reset, proceed as described in the previous paragraphs.

Things to note

1.The time of day must be set before the oven will ope- rate. There will be a few seconds delay before the oven switches on.

2.The timer function controls the oven only and will switch the oven OFF at the end of a timed period. This function is useful if you want to begin cooking immediately and have the oven switch OFF automatically.

3.If you have used the timer to time food cooking in the oven you will need to reset the timer before the oven can operate again.

 

 

PUSH

 

 

SET

Fig. 3

STOP

TIME

BOTH

A

U

T

O

 

 

PUSH

 

 

SET

Fig. 4

STOP

TIME

BOTH

Manual backgroundA

Manual background U

T

O

 

 

PUSH

 

 

SET

Fig. 5

STOP

TIME

BOTH

9

Page 9
Image 9
Zanussi ZCE 611 manual Setting the timer, Things to note