INTRODUCTION

WARNING: THIS COOKER MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover from the rating plate. This is situated on the lower front frame of the cooker and can be seen upon opening the fan oven door.

The cooker must be protected by a suitably rated fuse or circuit breaker. The rating of the cooker is given on the rating plate.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm²) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the cooker, open the fan oven door, and lift the cooker by holding inside the top of the compartment.

This is a type X appliance which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Ensure that the cooker is standing level.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the cooker is required to enable the cooker to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

8

Page 7 Page 9
Page 8
Image 8
Zanussi ZCE 7350 manual Introduction, Rating Plate, Installation
Page 7 Page 9

ZCE 7350 specifications

The Zanussi ZCE 7350 is a versatile and efficient electric cooker designed to elevate your cooking experience while providing convenience and ease of use. This appliance is especially suitable for those who love to prepare various dishes, as it combines an efficient oven with a reliable hob.

One of the standout features of the Zanussi ZCE 7350 is its dual cooking capabilities. This model comes with a spacious oven that has a generous capacity, allowing you to roast large cuts of meat, bake multiple trays of cookies, or prepare full meals for the entire family. The oven is equipped with fan-assisted cooking, which ensures even heat distribution throughout the cavity. This innovative technology helps to eliminate hot spots, ensuring that your dishes are cooked uniformly, resulting in perfectly baked goods and evenly roasted meats.

Another notable characteristic of the Zanussi ZCE 7350 is its four-zone ceramic hob. The hob heats up quickly and offers precise temperature control, allowing you to simmer sauces gently or boil water rapidly. Moreover, the smooth ceramic surface is easy to clean, helping you maintain a fresh-looking kitchen with minimal effort. The modern layout of the hob accommodates various pot sizes, making it easy to cook multiple dishes simultaneously.

For added safety and convenience, the Zanussi ZCE 7350 is fitted with features like residual heat indicators, which alert you when the surface is still hot after use. This precaution helps prevent accidental burns. The appliance also includes a timer function, which can be particularly useful for those who lead busy lives, allowing you to set cooking times and focus on other tasks without the worry of overcooking your meals.

The Zanussi ZCE 7350 is designed with user-friendly controls. Intuitive knobs and buttons make it easy to adjust settings, while the clear display allows you to monitor your cooking progress at a glance. The appliance also boasts a stylish appearance, featuring a sleek design that seamlessly integrates into any kitchen décor.

In summary, the Zanussi ZCE 7350 is not just an oven and hob combination but a reliable cooking partner that enhances your culinary creativity. Its efficient oven, practical ceramic hob, safety features, and user-friendly controls make it a great addition to any home kitchen. Whether you are an experienced chef or a casual cook, this cooker simplifies meal preparation, allowing you to enjoy the art of cooking without hassle.
Top Page Image Contents