4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

50 100

850

Fig.3

700

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

450

All dimensions in mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED.

DO NOT EARTH THIS APPLIANCE TO THE GAS

SUPPLY PIPING.

This appliance must be connected to 230V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug, fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. Ensure the plug is accessible to the user. If this is not long enough, the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED ORFig.4

DISPOSED OF SAFELY, AS THE PROTRUDING WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3

amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS

AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

42

Page 41 Page 43
Page 42
Image 42
Zanussi ZCG 7701X manual Connecting to GAS, Connection to the Electricity Supply
Page 41 Page 43

ZCG 7701X specifications

The Zanussi ZCG 7701X is a modern and efficient gas cooker designed to enhance culinary experiences in the kitchen. This versatile appliance combines stylish design with practical functionality, making it a top choice for cooking enthusiasts.

One of the standout features of the Zanussi ZCG 7701X is its spacious four-burner gas hob. The burners deliver varying heat levels, allowing cooks to prepare multiple dishes simultaneously. The hob includes a high-efficiency burner, which is designed for rapid heating, ensuring that boiling water or preparing sauces is quick and easy. Each burner features a sturdy cast iron pan support, providing stability for pots and pans.

The main oven in the Zanussi ZCG 7701X is equally impressive. It boasts a generous capacity of 70 liters, making it suitable for large meals or baking multiple dishes at once. The oven is equipped with a conventional cooking option, ensuring perfectly cooked dishes every time. Additionally, the integrated grill function allows for crisping and browning of food to perfection, making it ideal for meals that require a grilled finish.

Technology plays an important role in the performance of the Zanussi ZCG 7701X. The cooker features an electronic ignition system, which offers an instant spark to ignite the gas burners safely and effortlessly. This means less hassle and improved safety in the kitchen. Moreover, the gas cooker is designed with energy efficiency in mind, ensuring that it operates efficiently, saving both time and energy.

Cleaning is made simple with the Zanussi ZCG 7701X. The oven has an easy-to-clean enamel interior, which prevents food from sticking and ensures that any spills can be wiped away effortlessly. The glass door is also designed for easy cleaning, allowing for a clear view of the cooking progress without losing heat.

In terms of design, the sleek stainless-steel finish adds a touch of elegance to any kitchen. The control knobs are intuitive and easy to use, making temperature adjustments straightforward.

Overall, the Zanussi ZCG 7701X combines efficiency, versatility, and style, making it an essential kitchen appliance for those who love to cook. Whether rustling up a quick weekday dinner or preparing an elaborate feast, this gas cooker is tailored to meet the demands of everyday cooking with ease.
Top Page Image Contents