300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

295 mm.

 

 

PLAN VIEW OF THE COOKER

SIDE VIEW

FO 0179

OF THE COOKER

 

 

 

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted.

(See safety Requirements: Page 23).

If a stability bracket should be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 17) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

If using different types of gas bayonet connection, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

25

Page 24 Page 26
Page 25
Image 25
Zanussi ZCM 610 X, ZCM 600 W manual Connecting to Gas, Wall Face
Page 24 Page 26

ZCM 610 X, ZCM 600 W specifications

The Zanussi ZCM 610 X and ZCM 600 W are two versatile freestanding cookers designed to meet various cooking needs with efficiency and style. These models combine modern technology with user-friendly features, making them ideal for both experienced cooks and beginners.

The ZCM 610 X boasts a sleek stainless steel finish, while the ZCM 600 W is presented in a stylish white. Both models feature a classic design that seamlessly fits into any kitchen décor, enhancing the overall aesthetic appeal.

One of the standout features of these cookers is their dual fuel setup. The electric oven is paired with a gas hob in the ZCM 610 X, providing the benefit of precise temperature control for the oven while also delivering instant heat and visual feedback for the gas burners. The ZCM 600 W offers a conventional gas hob, ensuring reliability and consistency in cooking performance.

Both models come with a generously sized oven capacity, allowing users to prepare multiple dishes simultaneously. The ovens are equipped with conventional heating, ensuring even cooking results for a variety of meals, from roasts to baked goods. The ZCM 610 X also features an integrated grill function, perfect for achieving crispy finishes on dishes or for quick gratin preparations.

Another notable characteristic of the Zanussi ZCM range is the ease of cleaning. The ceramic enamel interior of each oven ensures that spills and splatters can be wiped away effortlessly, saving valuable time after cooking. Additionally, the removable oven door and removable inner glass make deep cleaning more manageable.

Safety is a key consideration in the design of both cookers. The ZCM 610 X is equipped with a flame failure safety device on the gas burners, which automatically cuts off the gas supply if the flame goes out. This feature provides peace of mind, allowing users to focus on their culinary creations without the worry of potential hazards.

In terms of usability, both models incorporate ergonomic knobs and control dials that are easy to operate, even for those unfamiliar with cooking appliances. The presence of a timer function in both cookers further enhances the cooking experience, allowing for perfect timing when preparing various meals.

In summary, the Zanussi ZCM 610 X and ZCM 600 W cookers bring together functionality, style, and safety. With their user-friendly features, ease of cleaning, and generous cooking capacities, they are excellent kitchen companions for anyone looking to elevate their cooking game. Whether for everyday family meals or special occasions, these cookers are designed to meet the diverse needs of modern cooking.
Top Page Image Contents