Zanussi ZCM 610, ZCM 600 manual Something not working, Service and Spare Parts, 0870 5

Models: ZCM 600 ZCM 610

1 28
Download 28 pages 30.2 Kb
Page 18
Image 18
Something not working

Something not working

If the aplliance is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

 

SYMPTOM

SOLUTION

 

ν There is no spark when lighting the gas

υ Check that the unit is plugged in and the electrical

 

supply is switched on

 

 

υ Check that the RCCB has not tripped (if fitted)

 

 

υ Check the mains fuse has not blown

 

 

υ Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

ν The gas ring burns unevenly

υ Check the main jet is not blocked and the burner

 

 

crown is clear of food particles.

 

 

υ Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

ν The oven does not come on

υ Check the oven is in manual operation and that

 

both a cooking function and temperature have been

 

 

 

 

selected.

 

 

υ Check the oven is wired in properly, and the socket

 

 

switch or the switch from the mains supply to the oven

 

 

are ON.

 

 

 

 

ν The oven temperature light does not come on

υ Select a temperature with the thermostat control

 

 

knob

 

 

υ Select a function with the oven function control

 

 

knob.

 

 

 

 

ν The oven light does not come on

υ Check the light bulb, and replace it if necessary

 

(see "Replacing the Oven Light")

 

 

 

 

 

 

ν It takes too long to finish the dishes, or they are

υ The temperature may need adjusting

 

cooked too fast.

 

 

 

 

 

 

ν Steam and condensation settle on the food and the

υ Refer to the contents of this booklet, especially to

 

oven cavity.

the chapter “Using the Oven”.

 

υ Leave dishes inside the oven no longer than 15-20

 

 

 

 

minutes after the cooking is completed.

 

 

 

 

ν The timer does not work

υ Check the instructions for the timer.

 

 

 

 

ν The oven fan is noisy

υ Check the grease filter is correctly fitted.

 

 

 

 

υ Check that shelves and bakeware are not vibrating

 

 

in contact with the oven back panel.

 

 

 

Service and Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the following pages.

Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working.”When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code

2.Your telephone number

3.Clear and concise details of the fault

4.The model and serial number of the appliance (found on the rating plate)

5.The purchase date

18

Page 18
Image 18
Zanussi ZCM 610, ZCM 600 manual Something not working, Service and Spare Parts, 0870 5