Zanussi ZCM 700 X manual If something goes wrong, Symptom, Solution

If something goes wrong

SYMPTOM	SOLUTION
■ The cooker does not operate.	◆ Check that the unit is plugged in and the electrical
	supply is switched on
	◆ Check that the RCCB has not tripped (if fitted)
	◆ Check the mains fuse has not blown
	◆ Check the correct control knob has been turned.
■ The gas ring burns unevenly	◆ Check the main jet is not blocked and the burner
	crown is clear of food particles.
	◆ Check the burner cap and crown have been
	replaced correctly, e.g. after cleaning.
■ The oven does not come on	◆ Check the oven is in manual operation and that
	both a cooking function and temperature have been
	selected.
	◆ The socket switch or the switch from the mains
	supply to the cooker are ON.
■ The oven temperature light does not come on	◆ Select a temperature with the thermostat control
	knob
	◆ Select a function with the oven function control
	knob.
■ The oven light does not come on	◆ Select a function with the oven function control
	knob
	◆ Check the light bulb, and replace it if necessary
	(see "Replacing the Oven Light")
■ It takes too long to finish the dishes, or they are	◆ The temperature may need adjusting
cooked too fast.
■ Steam and condensation settle on the food and the	◆ Refer to the contents of this booklet, especially to
oven cavity.	the chapter “Using the Oven”.
	◆ Leave dishes inside the oven no longer than 15-20
	minutes after the cooking is completed.
■ The oven fan is noisy	◆ Check that shelves and bakeware are not vibrating
	in contact with the oven back panel.

If after all these checks, the cooker still does not work, contact your local Zanussi Service Force Centre.

When you contact them, they will need the following information:

1.Your name, address and post code.

2.Your telephone number

3.Clear and concise details of the fault

4.The model and the serial number (which can be found on the rating plate)

5.Date of purchase

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

20