Zanussi ZCM 7701 - page 27

27

Standard guarantee conditions

We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part

thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our opti on repair or

replace the same FREE OF CHARGE for labour, materials or c arriage on condition that:

· The appliance has been correctly installed and used o nly on the electricity supply stated on the rating plate.

· The appliance has been used for normal domestic purpos es only, and in accordance with the manufacturer’s

instructions.

· The appliance has not been serviced, maintained, repaired, taken apart or tam pered with by any person not

authorised by us.

· All service work under this guarantee must be undertak en by a Service Force Centre.

· Any appliance or defective part replaced shall becom e the Company’s property.

· This guarantee is in addition to your statutory and oth er legal rights.

Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be availa ble outside these

hours in which case a premium will be charged.

Exclusions

This guarantee does not cover:

· Damage or calls resulting from transportation, improper use or neglec t, the replacement of any light bulbs or

removable parts of glass or plastic.

· Costs incurred for calls to put right an appliance whic h is improperly installed or calls to appliances outside

the United Kingdom.

· Appliances found to be in use within a commercial envir onment, plus those which are subject to rental

agreements.

· Products of Zanussi manufacture which are not marketed b y Zanussi.

GUARANTEE CONDITIONS

Contents

Main Page CONTENTS FOR THE USER FOR THE INSTALLER PREFACE INTRODUCTION WARNING: THIS APPLIANCE MUST BE EARTHED RATING PLATE GENERAL NOTES ON USING YOUR APPLIANCE ABOUT CONDENSATION AND STEAM THE COOLING FAN FOR THE CONTROLS GRILL AND OVEN FURNITURE THE CONTROL PANEL ZCM7701 FEATURES THE CONTROL PANEL TO SET THE TIME OF DAY TO USE THE COUNTDOWN THE TIMERTHE TIMER AUTOMATIC CONTROL SETTING THE CONTROLS FOR AUTOMATIC USE THE GAS HOB SELECTING THE HOB USES OF THE HOB TO LIGHT THE HOB BURNERS TO TURN OFF ANY BURNER Keep flames under the base of pans. If the Use pans with flat bases. They are more stable Cover pans with a lid whenever possible. Food To operate the grill open the grill door and turn THE GRILL The Top Oven/Grill neon will illuminate. It m ay At lower settings the grill may turn on and off The cooling fan will operate. For more details Food should be thoroughly dried before grilling Adjust the height of the grilling grid and grill pan Accompaniments such as tomatoes and When toasting bread use the shelf in position 1 Preheat the grill on a full setting for a few To operate the top oven turn the temperature THE TOP OVEN TO FIT THE TOP OVEN SHELF Page USES OF THE MAIN FAN OVEN SELECTING THE MAIN FAN OVEN Turn the main oven temperature control to the THE MAIN FAN OVEN TO FIT THE MAIN OVEN SHELVES Page OVEN COOKING CHART ROASTING CHART USES OF DEFROST FEATURE SELECTING DEFROST Turn the main oven temperature control to the DEFROST FEATURE When defrost is selected, the oven indicator It may turn ON and OFF periodically during Place the frozen food in a single layer where CARE AND CLEANING CLEANING THE OUTSIDE OF THE APPLIANCE CLEANING THE CONTROL KNOBS AND HANDLES CLEANING THE GRILL AND OVEN FURNITURE CLEANING INSIDE THE OVENS AND GRILL COMPARTMENT Manual cleaning of the Stayclean surfaces IS Slight discolouration and polishing of the A good time to allow the oven to run on is after Follow the recommendations on page 23 to keep Cook at the recommended temperatures. Use minimal, if any, extra oil or fat when roasting It is not necessary to add water to a meat tin Covering joints during cooking will also prevent CLEANING THE DOOR GLASS TO CLEAN THE INNER GLASS DOOR PANELS REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING? SERVICE AND SPARE PARTS 0870 5 929929 CUSTOMER CARE DEPARTMENT Page TECHNICAL DETAILSTECHNICAL DETAILS Page IMPORTANT SAFETY REQUIREMENTS PROVISION FOR VENTILATION MOVING YOUR APPLIANCE FOR YOUR SAFETY LOCATION OF APPLIANCE Page CONNECTING TO GAS SUPPLY FITTING THE STABILITY BRACKET PRESSURE TESTING CHECKING THE GRILL CHECKING THE HOTPLATE CHECKING THE TIMER TO SET THE TIME OF DAY (SEE FIG.5). AUTOMATIC OPERATION