Zanussi ZD 19/4 manual Contents, Environment Protection

¥Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

¥There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.

¥Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.

¥If the appliance has been transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from municipal authorities. The materials used on this appliance

marked by the symbol are recicable.

CONTENTS

Warnings	26	Hints for storage of frozen food	30
Use	28	Maintenance	30
Cleaning the interior	28	Periodic cleaning	30
Operation	28	Periods of no operation	30
Temperature regulation	28	Interior light	30
Fresh food refrigeration	28	Defrosting	31
Freezing fresh food	28	Customer service and spare parts	32
Storage of frozen food	28	Technical specifications	32
Thawing	28
		Installation	33
Ice-cube production	28
Movable shelves	29	Electrical connection	33
Door shelves	29
		Location	33
Hints	29
		Rear spacers	34
hints for refrigeration	29	Door reversibility	34
Hints for freezing	29

27