INSTALLATION
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.
The Manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the following E.E.C. Directives:
-87/308 EEC of 2/6/87 relative to radio interference suppression.
-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
For safety reasons, minimum ventilation must be as shown in Fig.
Appliance positioned under overhanging kitchen wall units (see A).
Appliance positioned without overhanging kitchen wall units (see B).
Attention: keep ventilation openings clear of obstruction.
Two adjustable feet at the cabinet base allow accurate levelling of the appliance.
100 mm |
|
A | B |
10 mm | 10 mm |
NP004 |
|
33
