Building in
Instructions for totally built-in appliance
Dimensions of the recess
Height of housing | 880 mm |
Depth of housing | 550 mm |
Width of housing | 560 mm |
For appropriate venting, follow indications in the figure.
Push the appliance into the housing until stop strip (A) touches the kitchen unit.
Open the door and push the appliance against the side of kitchen furniture opposite to that of appliance hinges.
Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grille (C) and hnge cover (D) into position.
Press in the joint covers between the appliance and the kitchen furniture.
The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom.
15
