Machine settings

Problem

Loading door does not close.

Drying cycle ends shortly after pro- gramme starts.

Drying cycle lasts an unusually long time. Note: After around 5 hours the drying cycle ends automatically.

Residue on inside surface of drum or drum ribs.

Conductance of water at installation site differs from standard setting of machine.

Filter not in place.

Not enough washing loaded or wash- ing loaded is too dry for selected programme.

Filter clogged.

Load volume too big.

Laundry insufficiently spun.

Clean inside surface of drum and drum ribs.

Re-programme standard setting for degree of drying (see ‘Programming options’ chapter).

Install filter into place.

Select time programme or higher drying level (e.g. EXTRA instead of CUPBOARD ).

Clean filter.

Reduce load volume.

Laundry must be adequately spun.

BUZZER SIGNAL permanent on/off

1. Turn the programme selector to any programme.

2.Press simultaneously theDELICATE and TEXTILE buttons and hold down for approx. 5 seconds.

3.The buzzer is by default always off.