12
Set switch to position 1 or 2.
Electronic adjustment
The water softener is set at the factory at level 5.
The appliance must be switched off.
1.Press and hold the start/cancel button. Turn the pro- gramme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel.
2.Release the start/cancel button when the digital dis- play shows the current setting.
Examples:
–level 5 = 
–level 10 = 
3.Press the start/cancel button to change the water softener level. Every time you press the button, the level increases.
4.Turn the programme knob to the off position to save the operation.
Use of dishwasher salt
Caution! Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause
damage to the water softener.
12
34
Fill the salt container with 1 litre of water (only the first operation).
56
It is normal that water overflows from the salt con- tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the salt compartment. Salt which stays on the tank for a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con- tainer. This prevents of corrosion because of spilled salt.
When you set electronically the water softener to level 1, the salt indicator light does not stay on.
7
