Setting the water softener electronically (see table)

The water softener is factory set at position 5.

The dishwasher must

Press and hold the start/cancel button and turn the

be switched off

programme selector dial clockwise till the first

 

programme. Keep the button pressed until the

 

programme selector indicator light and the

 

start/cancel indicator light start flashing.

 

 

 

 

 

 

 

 

 

 

 

 

Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set.

The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds.

To change the level, press the start/cancel button. Each time the button is pressed the level increases. (Level 1 follows level 10).

The end of programme indicator light indicates the new setting.

To memorise the operation, turn the programme selector dial to position off.

8

Page 8
Image 8
Zanussi ZDF 121 manual Setting the water softener electronically see table