Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must | Press and hold the start/cancel button and turn the |
be switched off | programme selector dial clockwise till the first |
| programme. Keep the button pressed until the |
| programme selector indicator light and the |
| start/cancel indicator light start flashing. |
Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set.
The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds.
To change the level, press the start/cancel button. Each time the button is pressed the level increases. (Level 1 follows level 10).
The end of programme indicator light indicates the new setting.
To memorise the operation, turn the programme selector dial to position off.
9
