Zanussi ZDF 601 manual Washing programmes, Auto washing programme

Models: ZDF 601

1 24
Download 24 pages 18.07 Kb
Page 13
Image 13

Washing programmes

Programme

Degree of soil

Cycle

 

(4) Consumption values

 

and

description

 

 

 

 

 

 

 

Energy

 

Water

 

type of load

 

consumption

 

consumption

 

 

 

 

(in kWh)

 

(in litres)

(1)

 

Hot prewash

 

 

 

 

 

Heavy soil.

Main wash up to 70°C

 

 

 

 

 

POWER BOOST

 

 

 

 

 

 

2 warm rinses

 

 

 

 

 

Crockery, cutlery, pots and

1,7 - 1,9

 

 

23 - 25

Intensive 70°

 

 

pans

1 hot rinse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drying

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2)

 

Cold prewash

 

 

 

 

 

Normal soil.

Main wash up to 65°C or 50°C

 

 

 

 

 

Automatic

 

 

 

 

 

 

1 or 2 cold rinses

1,1 - 1,5

 

12 - 25

Crockery and cutlery

 

65°-50°

1 hot rinse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drying

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Light soil.

Main wash up to 60°C

 

 

 

 

 

Quick Wash 60°

0,8

 

9

Crockery and cutlery

1 hot rinse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cold prewash

 

 

 

 

 

(3)

Normal soil.

Main wash up to 50°C

 

 

 

 

 

1 cold rinse

1,05

 

15

Economy 50°

Crockery and cutlery

 

1 hot rinse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drying

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Any.

1 cold rinse (to avoid food scraps

 

 

 

 

 

 

from sticking together). This

 

 

 

 

 

Rinse Hold

Partial load (to be

 

 

 

 

 

0,1

 

4

programme does not require the use

 

 

completed later in the day).

 

 

 

 

 

 

 

 

 

 

 

 

of detergent.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1)POWER BOOST - The Intensive 70° degree heavy soil programme features "Power Boost". An additional detergent dose (5/10 grams) must be placed in the WRD dispenser (see page 11). This programme begins with a heated pre-wash phase using the additional detergent for maximum cleaning results.

(2)Auto washing programme

During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is.

If the appliance is partially loaded and the dishes lightly soiled, the «prewash», «main wash», and «rinse» phases of the programme are shorter and the water consumption level is lower.

If the appliance is fully loaded and the dishes heavily soiled, the «prewash», «main wash», and «rinse» phases of the programme are longer and the water consumption level is higher.

During the Auto programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C depending on the amount of soil on the dishes.

(3)Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended.

(4)The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply.

The programme duration is visible in the digital display when the selection of the washing programme occurs.

13

Page 13
Image 13
Zanussi ZDF 601 manual Washing programmes, Auto washing programme