Zanussi ZDI 6896 SX manual Rinse aid, Filling with rinse aid, Adjusting the dose

Models: ZDI 6896 SX

1 24
Download 24 pages 12.03 Kb
Page 9
Image 9
Rinse aid

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when REFILL RINSE AID appears in the display.

This occurs only during the setting mode and at the end of the washing programme, during the progress of the washing programme the indication for rinse aid refilling is not active.

If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid must be placed in the detergent compartment. In this case the rinse aid dispenser must be deactivated in order to avoid a double dosage.

Deactivation/activation of the rinse aid dispenser

Factory setting: rinse aid dispenser activated.

Follow the instructions given in the paragraph "The control panel", how to set the various options.

Press repeatedly the option selection button until the message RINSE AID is displayed; to deactivate the dosage select NO.

9

Page 9
Image 9
Zanussi ZDI 6896 SX manual Rinse aid, Filling with rinse aid, Adjusting the dose