Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
-Setting of the water softener
-End of programme
-Something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1.Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode).
If only one programme selection push button indicator light is illuminated, this means that a washing programme has been selected.
The programme must be cancelled: press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the set programme push button starts flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme selection push buttons will illuminate indicating that the set programme has been cancelled and that the machine is now in setting mode.
2.Press simultaneously function push buttons 2 and 3, the indicator lights of the function push buttons 1, 2 and 3 start flashing.
3.Press the function push button 3, the indicator lights of function push buttons 1 and 2 turn off while the indicator light of the push button 3 goes on flashing, at the same time the END OF CYCLE indicator light illuminates indicating that the audible signals are active.
4.To deactivate the audible signals, press again the function push button 3, the END OF CYCLE indicator light turns off, indicating that the audible signals have been deactivated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
To activate again the dosage of rinse aid simply follow the above operations until the END OF CYCLE indicator light illuminates.
5
