Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with rinse aid
1.Open the container by pressing the release button (A).
2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".
●If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid must be placed in the detergent compartment.
In this case the rinse aid dosage must be deactivated in orderto avoid a double dosage.
Deactivation/activation of the dosage of rinse aid
(The dishwasher must be switched off)
Factory setting: inflow of rinse aid activated
1. Press the On/Off push button. All programme selection push |
BR10 |
BR16 |
buttons indicator lights will illuminate (setting mode). |
If only one programme selection push button indicator light |
is illuminated, this means that a washing programme has |
been selected. |
The programme must be cancelled: press simultaneously |
the function push buttons 2 and 3 for about 2 seconds, the |
indicator light of the set programme push button starts |
flashing for about 2 seconds. |
After about 2 seconds the indicator lights of all the |
programme selection push buttons will illuminate indicating |
that the set programme has been cancelled and that the |
machine is now in setting mode. |
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position
6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky |
| |
whitish streaks on the dishes |
| |
or a bluish film on glassware | BR12 | |
or knife blades. | ||
| ||
Top up the rinse aid when the |
| |
indicator (B) becomes clear. |
| |
| BR11 |
2. | Press simultaneously function push buttons 2 and 3, the |
| indicator lights of the function push buttons 1, 2 and 3 start |
| flashing. |
3. | Press the function push button 2, the indicator lights of |
| function push buttons 1 and 3 turn off while the indicator |
| light of the push button 2 goes on flashing, at the same time |
| the END OF CYCLE indicator light illuminates, indicating |
| that the dosage of rinse aid is active. |
4. | To deactivate the dosage of rinse aid, press again the |
| function push button 2, the END OF CYCLE indicator light |
| turns off, indicating that the dosage of rinse aid has been |
| deactivated. |
5. | To memorise the operation, switch off the dishwasher by |
| pressing the On/Off push button or wait about 60 seconds |
| after which the dishwasher will automatically return to |
| setting mode. |
To activate again the dosage of rinse aid simply follow the above operations until the END OF CYCLE indicator light illuminates.
8
